• Supports Multi-serial module ( i-8112iW,i-8114W, i-8114iW,i-8142iW, i-8144iW)
• To configure the modules, you have to update WinPAC Utility to Ver 2.0.0.6.
• Supports WP-8141.
  Since version 1.3.0.4, the OS can support all of WP-8x41 series.

Bug Fixes

• Some modules (i-8017HW, i-8094H) plugged in Slot0~Slot3 make communication error to COM2,COM3 and COM4.
• CPU loading becomes 50% even there is no program running. It should be less than 2%.
• Can not run programs for more than 3 days.
• Can not perform on-line debug on VS.Net 2005.
• SQL command "sqlCmd.ExecuteResultSet(ResultSetOptions.Scrollable)" causes an error exception. SQL CE 3.5 (3.5.5692.0) been recovered to SQL CE 3.5 (3.5.5386.0)
• Interrupt function of I/O module does not work.
  The interrupt number is redefined in OS version 1.3.0.4. To make interrupt function of I/O modules work correctly, WinPACSDK.dll must be updated to ver 1.0.7.9 or later. Interrupt related I/O modules include i-8048W, i-8092F, i-8094F, i-8094H.

Modifications

• Set the running LED (on the front panel) always On after the system booting.
  Before, the LED is keep at blank and sometimes flashing.

New Features

• Eboot can be updated to WP-814x/WP-844x/WP-884x controller

Bug Fixes

• Date of the Eboot cannot be saved to EEPROM. This makes the information shown on WinPAC Utility is always "FFFFFF".

New Features

• Adds "Multi-serial port wizard" to configure multi-serial modules.
• Shows the battery capacity of the Dual-Battery Backup SRAM on the backplane.
• Shows Module type (I-8K or I-87K) on System Information