ICP DAS NEW Products: £gPAC-7186EX-FD
 
 
Introduction:

£gPAC-7186EX-FD, a palm-sized programmable automation controller, features data logging, I/O control as well as various COM ports, such as Ethernet, RS-232 and RS-485. At the same time, ICP DAS also provides easy-to-use software development tool kits (Xserver, VxComm, Modbus libraries). By taking advantage of them, your serial devices are easily able to be integrated with uPAC-7186EX-FD, and furthermore, enjoy the ability of Ethernet!? Through the standard Modbus protocol, uPAC-7186EX-FD also seamlessly works with SCADA software, like Indusoft, ISaGARF, DasyLab, Trace Mode, Citect, iFix, etc.

For the hardware, it supports an I/O expansion bus. By pairing the I/O expansion bus with different kinds of X-boards, various I/O functions can be performed, such as D/I, D/O, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, ASIC key and so on. From now on, there are more than 50 X-boards available for £gPAC-7186EX-FD. Come on, and choose one of them to make your project outdoing others!?* One X-board for the I/O expansion bus at one time.

Compared to uPAC-7186EX, uPAC-718EX-FD equips with an extra 64MB flash memory. By using the built-in MFS (MiniOS7 File System) library, you can freely read/write files from/to the 64MB flash memory.
Simply with the uPAC-786EX-FD, many kinds of data-logging applications become a piece of cake! For example, log analog signals with timeline, or log RS-232/485 data for further analysis.

 
Comparison table between £gPAC-7186EX-FD, £gPAC-7186EX and I-7188EX:
Item £gPAC-7186EX-FD £gPAC-7186EX I-7188EX
CPU 80M Hz 80M Hz 40M Hz
SRAM 512KB 512KB 512KB
Flash for OS and .exe files 512KB 512KB 512KB
EEPROM 16KB 16KB 2KB
Flash for Data Logger 64MB - -
Ethernet Port 10/100 Base-TX 10/100 Base-TX 10 Base-T
Frame Ground for ESD Protection Yes Yes -
 
Features:
  1. Support data-logging applications on 64MB flash memory by MiniOS7 File System (MFS)
    • Read/write/append data to files constantly
    • Provide C language API (mfs_OpenFile, mfs_CloseFile, mfs_WriteFile, mfs_ReadFile, ”K, etc)
    • Data-writing verification (To make sure that the written data is correct)
    • Automatic file system recovery in the event of unexpected reset or power off
  2. Support Virtual COM technology
  3. Support Modbus Protocol, Ethernet Protocols (TCP, UDP, IP, ICMP, ARP)
  4. Easy-to-use software development tool kits (using C language)
  5. Support Web Configuration
  6. Remote Configuration/Maintenance
  7. Built-in watchdog timer (WDT)
  8. Offer an I/O Expansion Bus
 

For more information, please refer to the following link.
http://www.icpdas.com/products/PAC/i-7188_7186/upac-7186ex-fd.htm

 
back  
   
Copyright© ICP DAS Co., Ltd. All Rights Reserved