ICP DAS NEW PRODUCT¡GI-7188XBD-CAN programmable automation controller

The I-7188XBD-CAN PAC (programmable automation controller) is powered of 80188-40 processor with 512K bytes SRAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Users can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN PAC has different I/O types for users to match their requirement. For I-7188XBD-CAN it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface, and it has over voltage protection to avoid the damage of all other parts of I-7188XBD-CAN when the surge voltage comes from CAN bus. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN PAC is economic and convenient solution for diversification CAN application.

Features

  • 2500Vrms photo-isolation protection.
  • Compatible with CAN specification 2.0 parts A and B.
  • Programmable transfer rate up to 1 Mbps.
  • Jumper select 120£[ terminator resistor for CAN channel
  • 64-bit hardware unique serial number inside
  • COM driver support interrupt & 1K QUEUE input buffer
  • COM port: COM1, COM2
  • Built-in RTC, NVRAM, EEPROM
  • One digital Input channel and one open collector output channel
  • Built-in self-tuner ASIC controller on RS-485 port
  • 7-segment LED display
  • Built-in ICP DAS¡¦s MiniOS7
  • Program download port: COM1

For more information, please refer to
http://www.icpdas.com/products/Remote_IO/can_bus/I-7188can.htm

   
Copyright©1983-2004 ICP DAS Co., Ltd. All Rights Reserved