¡@

Wireless Modem 003

back

Q.Can you suggest the fastest setting way that I could test a pair of SST-2450 or SST-2400?

¡@

Ans:

Setting:

(1-1) SST-2400-->SST-2400 is set by jumper, you need to open the plastic case(Refer to the following figures). Then follow the P.10 of Manual to set these pair of modules. Refer to the following table for setting options:

(1-2) SST-2450-->SST-2450 is set by software, you need to install the software

(Attached CD:Napdos\Others\Wireless Modem\SettingTool or Download:ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/wireless/wireless%20modem/sst-2450/settingtool/.)    

¡@

Testting:

Connect a pair of  SST-2450s to different COM ports, and use Terminal program to send/receive data.

TABLE

1.The same channel

2.The same frequency

3.Baudrate depends on your devices.

4.Half-Duplex

5.Slave

6.Synchronous

7.Interface depends on your devices.

back

Written by Tony Lee 

Date:2002/12/16