I-8000
Controller 007
back
Q: Can I
write my own protocol or third-party protocol to apply on ISaGRAF
controllers ?
Ans:
Yes. Com3/Com4 of I-8xx7, & Com2 of I-7188EG/XG can do that (refer
to table in Q0006).
Additionally, If you have purchased extra serial port modules
(I-8112/8114/8142/8144), I-8xx7 can use up to Com20, while
I-7188EG/XG can use up to Com8 (X503~X514).
Please
use functions with name of COMxxxx to access to these COM port. For
example, COMOPEN, COMREADY. (Refer to Appendix A.4 of the ¡§User¡¦s
Manual Of the I-8417/8817/8437/8837¡¨).
You
may download the whole manual at
http://www.icpdas.com/products/PAC/I-8000/isagraf.htm
Written by Chun Tsai
Date:2002/12/26 |