I-7000
Remote I/O 010
back
Q.Can the 7000 be
used as a full duplex RS-485 system ?
Ans:NO, the 7000 is
worked in a half duplex RS-485 system. The 7000 use a two-wire,
D+ and D-, differential RS-485 network. The D+ and D- signal logically
form a single bi-direction data line, so this single data line can
send or receive data in the different time. Therefore the 7000 can't
send the command string and receive the result string at the same
time. The host computer must send the command string first then
wait for the result string returned by the 7000.
¡@
¡@
¡@
Written by David Chen
Date:2002/12/24 |