I-7000
Remote I/O 006
back Q.Can the checksum of the command string be enabled?
Ans:Yes, but the default
condition of checksum is DISABLE. Refer to Sec. 2.7 of the ¡§GettingStart.pdf¡¨
for enable/disable checksum. To ENABLE the checksum, two
more checksum char must be added to the original command string.
So the command string in checksum enable mode is two more bytes
longer than the default checksum disable command string.
$012[0x0D]
--> command
string under checksum DISABLE
$012B1[0x0D] -->
command string under checksum ENABLE
¡@
Written by David Chen
Date:2002/12/24 |