RSM-405FC

5-Port Real-time Redundant Ring Switch with 2-Fiber Port (Multi Mode, SC Connector) with metal case
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC
RSM-405FC

Features


• Automatic MDI/MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 3.2 Gbps high performance memory bandwidth
• Supports operating temperatures from 0°C ~ +70°C
• Redundant Power Inputs +10 VDC ~ +30 VDC
• Power failure alarm by relay output
• Modbus remote monitoring
• Supports Modbus OPC Server
• Store-and-forward architecture
• Built-in Cyber-Ring redundant technique
• Frame buffer memory: 512 Kbit
• 1024 MAC addresses
• Multi-mode, SC Connector Fiber supports
• DIN-Rail Mounting or Wall Mounting
CE UKCA FCC RoHS WEEE

Introduction

The RSM-405FC is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. The RSM-405FC supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a copper link failure within approximately 20 ms V for the majority of applications a seamless process. The RSM-405FC is much more easy to use and absolutely free of software setting. After unpacking from the shipping case, it just takes one or two dip or rotary switch to make it work. The RSM-405FC provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RSM-405FC 's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.

Applications

Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES RSM-405FC     CR DESCRIPTION5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, SC Connector with metal case (RoHS)
Includes 4SNPNA010021G Wall mount
This combination include other products.
LED Indicators
Status 10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port)
Ethernet
Ports 3 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, IEEE 802.3u, IEEE802.3x
Processing Type Store & forward wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol Modbus/RTU, Modbus/TCP
Redundant Strategy STP, Ring (ICP DAS)
Isolation 1500 Vrms 1 minute
DIP Switch Yes,
1x Redundancy mode confi guration
1x Max. Recovery time selection
Fiber
Ports 2-port 100 Base-FX
SC connector
Mode Multi Mode
Fiber Cable 50/125, 62.5/125 or 100/140 gm
Distance 2 km, (62.5/125 gm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -32 dBm Max.
RX Overload -8 dBm Max.
Budget 12 dBm
COM Ports
Ports 1 x RS-232/RS-485
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC (Isolation,redundant input)
Redundant Power Inputs Yes
Consumption 0.4 A @ 24 VDC
Alarm Output Yes,Relay 2 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) DIN-rail mounting: 73 x 118 x 105 (W x L x H)
Wall mounting: 73 x 132 x 105 (W x L x H)
Installation DIN-rail mounting or wall mounting
Ingress Protection Rating IP30
Environment
Operating Temperature 0 °C ~ + 70 °C
Storage Temperature -20 °C ~ + 85 °C
Humidity 10 ~ 90% RH, non-condensing