PIO-DA16U
Universal PCI, 16-ch, 14-bit AO Board
Features
- Universal PCI (3.3 V/5 V) Interface
- 14-bit, 16-channel Analog Output
- Software Calibration
- Two Timer-triggered Interrupt Sources
- Double-buffered DA Latch
- 16-channel 5 V/TTL Digital Output
- 16-channel 5 V/TTL Digital Input
- Pull-high and Pull-low Function for DI Channels
- Supports Card ID (SMD Switch)
Introduction
The PIO-DA series cards are compatible with the PCI versions of the PIO-DA cards and, in most cases, the PIO-DA series can be used as a direct replacement for the PIO-DA series without requiring any modification to the software or the driver.
The voltage output range for the PPIO-DA series is from -10 V to +10 V, and the current output range is from 0 to 20 mA.
In addition, the PIO-DA series also features the following innovative advantages:
1. Accurate and easy-to-use calibration:
ICP DAS provides a software calibration function rather than manual calibration so that jumpers and trim-pots are no longer required for calibration, and the calibration data can be saved in the EEPROM for long-term use.
2. Individual channel configuration:
Each channel can be individually configured as either voltage or current output.
3. Card ID:
ICP DAS has also included an onboard Card ID switch on the PIO-DA series that enables the board to be recognized via software if two or more boards are installed in the same computer.
The voltage output range for the PPIO-DA series is from -10 V to +10 V, and the current output range is from 0 to 20 mA.
In addition, the PIO-DA series also features the following innovative advantages:
1. Accurate and easy-to-use calibration:
ICP DAS provides a software calibration function rather than manual calibration so that jumpers and trim-pots are no longer required for calibration, and the calibration data can be saved in the EEPROM for long-term use.
2. Individual channel configuration:
Each channel can be individually configured as either voltage or current output.
3. Card ID:
ICP DAS has also included an onboard Card ID switch on the PIO-DA series that enables the board to be recognized via software if two or more boards are installed in the same computer.
Accessories
(16)_PIO-DA4U(8U)(16U)_PISO-DA4U(8U)(16U)-accessories.png)
Applications
- High speed data acquisition system.
- Process monitor and control.
- Vibration analysis.
- Digital pattern generator from digital I/O port.
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| Hardware | |
|---|---|
| Card ID | Yes(4-bit) for Version 1.1 or above |
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Analog Output | |
|---|---|
| Channels | 4 |
| Range | Voltage: ±10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ±2 LSB @ 25 °C, ± 10 V |
| Response Time | 333 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.71 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
|---|---|
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
|---|---|
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
|---|---|
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
|---|---|
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
|---|---|
| Consumption | 1400 mA @ +5 V |
| Mechanical | |
|---|---|
| Dimensions (mm) | 105.1 x 188 x 22 (W x L x D) |
| Environment | |
|---|---|
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
