NSM-209FT

8-port 10/100 Mbps Ethernet with 1 fiber port Switch (Multi mode, ST connector) with metal case
NSM-209FT
NSM-209FT
NSM-209FT
NSM-209FT
NSM-209FT
NSM-209FT
NSM-209FT
NSM-209FT

Features


• Provides 1 x 100-FX fiber port plus 8 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Automatic MDI/MDI-X crossover for plug-and-play
• Store-and-forward architecture
• Multi-mode, ST Connector Fiber supports
CE UKCA FCC RoHS WEEE

Introduction

The NSM-209FT is a 8-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NSM-209FT provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Applications

Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES NSM-209FT     CR DESCRIPTIONMulti-mode, ST Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS)
This combination include other products.

Similar Products

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact
LED Indicators
Status PWR1, PWR2, PWR_Fault, PWR_OK, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port)
Ethernet
Ports 8 x RJ-45, 10/100 Base-TX
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Table 2048
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
Fiber
Ports 1 x 100 Base-FX, ST connector
Mode Multi-Mode
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -32 dBm
Power
Reverse Polarity Protection Yes
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.26 A @ 24 VDC
Alarm Output Yes,Relay 1 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) 73 x 132 x 105 (W x L x H)
Installation DIN-rail mounting or wall mounting
Ingress Protection Rating IP20
Environment
Operating Temperature -10 °C ~ +75 °C
Storage Temperature -20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing