NSM-208PSE

8-port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch with metal case
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE
NSM-208PSE

Features


• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Auto-detection of PD (powered devices) and automatic power management
• Over-temperature, over-current and over/under-voltage detection
• Automatic MDI/MDI-X crossover for plug-and-play
• Store-and-forward architecture
CE UKCA FCC RoHS WEEE

Introduction

The NSM-208PSE is an 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet switch, it supports 8 PoE ports which are classified as power source equipments (PSE). The NSM-208PSE makes centralized power supply come true and provides up to 15.4 W of power per port. The NSM-208PSE can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.

Applications

Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES NSM-208PSE     CR DESCRIPTION8-port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch; Metal Casing (RoHS)
This combination include other products.

Similar Products

LED Indicators
Status Power, Link/Act, Power Device is detected
Ethernet
Ports 8 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 2048
Frame Buffer Memory 768 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin Assignments V+ (Pin 1, 2), V- (Pin 3, 6)
PoE Disconnect Mode DC disconnect
PoE Voltage +46 ~ +55 VDC depending on power input
Power
Reverse Polarity Protection Yes
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.1 A @ 48 VDC without PD loading
2.8 A @ 48 VDC with PD full loading
Mechanical
Casing Metal
Dimensions (mm) 25 x 168 x 119 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing