M-7019R-G

8-ch Universal AI Module with High Voltage Protection
M-7019R-G
M-7019R-G

Features

  • 8 Universal Analog Inputs
  • Individual Channel Configuration
  • Jumper Selectable Voltage, Current or Thermocouple Input
  • High Over-voltage Input Protection
  • High Common Voltage Protection
  • Open Thermocouple Detection
  • Built-in Dual Watchdog
CE UKCA FCC RoHS WEEE

Introduction

The M-7019R is an analog input module that includes 8 differential analog input channels. Voltage, current, or thermocouple input can be selected for all analog Input channels via a jumper, and each channel can be configured for an individual range. The voltage input range can be from ±15 mV to 10 V, the current input range can be either +4 to +20 mA, 0 to +20 mA, or ±20 mA, and types J, K, T, E, R, S, B, N, C, L, M, LDIN43710 can be used for the thermocouple input.

Up to 8 different analog input types can be connected to a single module. The module provides up to 240 Vrms overvoltage protection, 4 kV ESD protection, and 3000 VDC intra-module isolation also features per-channel open wire detection for the thermocouple and +4 ~ +20 mA input types. The M-7019R supports Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7019R.

Applications


• Building Automation
• Factory Automation
• Machine Automation
• Remote Maintenance
• Remote Diagnosis
• Testing Equipment

Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES M-7019R-G     CR DESCRIPTION8-ch Universal AI Module with High Voltage Protection, using DCON and Modbus Protocols (Gray Cover) (RoHS)
This combination include other products.

Similar Products

CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
Intra-module Isolation 3000 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
LED Indicators
Status 1 x Power and Communication
Analog Input
Channels 8 Differential
Type Voltage
Current
Thermocouple
Sensor Type Thermocouple: J, K, T, E, R, S, B, N, C, L, M, LDIN43710
Range Voltage: ±15 mV, ±50 mV, ±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V
Current: ±20 mA, 0 ~ +20 mA, +4 ~ +20 mA (Jumper selectable)
Resolution 16-bit
Accuracy ±0.1% of FSR
Sampling Rate 8 Hz (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Thermocouple: > 400 kΩ
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Individual Channel Configuration Yes
Open Wire Detection For Thermocouple Only (Software Selectable, *Note1)
COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.2 W
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing

Specification Memo

Note:
For highly-accurate thermocouple measurement, ICP DAS recommends selecting the I-7018Z/I-7019Z module,which features automatic cold-junction compensation for each channel, ensuring consistent and stable temperature output.
Note1: Firmware version B3.7 or later