HRT-227CS
HART to Single Mode Fiber Converter
Features
- Support HART Short/Long frame
- Support HART Burst mode
- Support point-to-point or multi-drop HART mode
- Support connecting up to 15 HART slave devices
- Allow two HART masters
- Provide HC_Tool utility for module configuration
- Support firmware update via ComPort
- Fiber broken line detection
- Fiber Type: SC ; Single mode ; 100 Base-FX
- Fiber max. transmission distance up to 30 km
- 4KV ESD Protection
- Built-in Watchdog
- Selectable 250Ω loop resistor
- The HART port with the same Group ID can communicate with each other
Introduction
The HRT-227CS is a HART to Fiber converter paired used to extend HART communication distance via single mode fiber optic transmission medium. In order to solve the problem between HART and fiber transmission medium, HRT-227CS is specially designed for converting the HART signal to fiber optic cables. Built-in a HART 250 Ω loop resistor adjustable by dip switch. Therefore, users can make data collection and processing of HART network easier and quicker by applying HRT-227CS. In addition, we also provide the free HC_Tool utility for module configuration easily.
Applications
- Current Measuring
- Petrochemical Industry Application
- Environment Monitoring
- Tunnel Monitoring
- Monitor system
- Building Monitoring
Ordering Information
| PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
|---|---|---|---|
This combination include other products.
Similar Products
| LED Indicators | |
|---|---|
| Status | PWR, FB_Ack, FB_Err, HT_Err, HT_Tx and HT_Rx |
| COM Ports | |
|---|---|
| Ports | RS-232 (TXD / RXD / GND) for configuration (1200, O, 8 ,1) |
| Fiber | |
|---|---|
| Ports | SC Duplex type ; Single mode ; 100 Base-FX |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 |
| Wavelength | 1310 nm |
| TX Output | -15 dBm Min. -8 dBm Max. |
| RX Sensitivity | -34 dBm Max. |
| RX Overload | -5 dBm Max. |
| Budget | 19 dBm |
| HART | |
|---|---|
| Ports | 1 |
| Data | Only Digital Data |
| Loop Resistor | Selectable 250 Ω loop resistor |
| Isolation | UL1577 Spec. |
| Protocol | 2-pin screwed terminal block (HART+, HART-) |
| Power | |
|---|---|
| Reverse Polarity Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Input Range | Unregulated +10 ~ +30 VDC |
| Consumption | 3W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 33.0 x 126 x 101 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C (-13 to 167ºF) |
| Storage Temperature | -30 ~ +80 °C (-22 to 176ºF) |
| Humidity | 10% ~ 90% RH, Non-condensing |
