tDS-715(i)-T is the terminal type power input model of tDS-715(i). It does support PoE. Please refer to the table below for the difference of power supply connectors.

Introduction:

The tDS-715(i)-T is a Serial-to-Ethernet device server that is designed to add Ethernet and Internet connectivity to any RS-422/485 devices, and to eliminate the cable length limitation of legacy serial communication. It can be easily used for remote controlling of your serial devices through Ethernet network.

By using the VxComm Utility, the built-in COM port of the tDS-715(i)-T can be virtualized to a standard PC COM port in Windows. For most serial devices don't have network ports; tDS-715(i)-T turns those devices being able to be connected to the network. Therefore, users can transparently access or monitor serial devices over the Internet/Ethernet without software modification.

The tDS-715i-T also adds 3000 VDC isolation and +/-4 kV ESD protection component that diverts the potentially damaging charge away from sensitive circuit to protect the module and equipment from a sudden or momentary electric current.

 

Features:

• Incorporates Serial Devices in an Ethernet network
• 10/100 Base-TX Ethernet
• VxComm Utility for 32/64-bit Microsoft Windows XP/2003/2008/7/8/10
• Watchdog Timer Suitable for Use in Harsh Environments
• 3000 VDC Isolation and +/-4 kV ESD protection
• "Virtual COM" Extends the COM Port number on PC.
• Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocol
• Supports UDP responder for device discovery
• Allows easy firmware updates via the Ethernet
• DC terminal block

For more information, please visit the tDS-700 series web site.