HMIWorks Standard Edition

Supports : TPD-280-H/Mx, TPD-283-H/Mx, TPD-283U-H/Mx, 
           TPD-43x-H/Mx, TPD-703 (-64),
           VPD-13x-H, VPD-14x-H, and VPD-173N/173X (-64).
			  
Not Supported (Phased-out):
           TPD-280 / 283, TPD-280U / 283U, TPD-430 / 433, TPD-432F / 433F.
           VPD-130(N) / 132(N) / 133(N), VPD-142(N) / 143(N).
		   
Copyright: ICP DAS Co., Ltd. All rights reserved.

Introduction:

HMIWorks Standard Edition is free software for ICP DAS customers, and 
is used to develop application programs for ICP DAS TouchPAD products.   

Note:

1. The phased-out models are not supported starting from the HMIWorks v2.30.
 
2-1. Users may need to remove old USB driver manually.
     > Right-click on the "My Computer", click "property", "hardware", "Device Manager".
     > Right-click on the "Stellaris Device Firmware Upgrade".
     > Click "Uninstall" to remove the device.
        
2-2. Install the new HMIWorks. 
2-3. Connect the USB download cable between the TouchPAD and PC.
2-4. Power up the TouchPAD.
     The Device-Manager should show a "TivaWare Device Firmware Upgrade" device.
        
     Finish the plug&play precedures if required.